Examples
Examples
Try the starting example
- Circular handle centerline radius (mm)
- 30
- Arc sweep angle (degrees)
- 180
- Attachment allowance per end (mm)
- 10
- Handle blank centerline length (mm)
- 114.24778
Try another scenario
- Circular handle centerline radius (mm)
- 33
- Arc sweep angle (degrees)
- 180
- Attachment allowance per end (mm)
- 10
- Handle blank centerline length (mm)
- 123.672558
Calculation method
Calculation method
Handle blank centerline length (mm)
Radius×angle radians +2 attachment allowances; circular-arc model.
Symbols and units
- a
- Circular handle centerline radius (mm)
- b
- Arc sweep angle (degrees)
- c
- Attachment allowance per end (mm)
Use the units shown. A list keeps the order in which you enter its values. The symbol ^ means “raised to the power of”.
Assumptions & limits
Assumptions & limits
- User-chosen curve geometry, attachment allowance. Returns Handle blank length. All coefficients and observations are user supplied; results describe only the stated mathematical model. Quantities are deterministic calculations from supplied observations and assumptions; no external data is fetched. Supported limits: Finite inputs only; numeric fields bounded as labelled. Lists and JSON records are limited to 256 entries unless a stricter tool bound is stated. No automatic design approval, legal conclusion, treatment recommendation or safety certification. Circular handle centerline radius (mm): minimum 1e-12, maximum 1000000000000.0. Arc sweep angle (degrees): minimum 1e-12, maximum 360. Attachment allowance per end (mm): minimum 0, maximum 1000000000000.0.
Are these inputs private?
These calculations run in your browser. A shared link contains the values you choose to share. Only questions submitted to the separate AI finder are sent to OpenAI.