Examples
Examples
Try the starting example
- Green outer cylinder radius (cm)
- 5
- Green outer height (cm)
- 10
- Green inner radius (cm)
- 4.4
- Inner cavity depth (cm)
- 9
- Measured wet density (g/cm³)
- 1.8
- Additional trimming mass allowance (%)
- 20
- Retained clay volume (cm³)
- 238.007059
- Starting clay mass (kg)
- 0.514095
Try another scenario
- Green outer cylinder radius (cm)
- 5.5
- Green outer height (cm)
- 10
- Green inner radius (cm)
- 4.4
- Inner cavity depth (cm)
- 9
- Measured wet density (g/cm³)
- 1.8
- Additional trimming mass allowance (%)
- 20
- Retained clay volume (cm³)
- 402.940674
- Starting clay mass (kg)
- 0.870352
Calculation method
Calculation method
Retained clay volume (cm³)
pi(outer radius²×outer height−inner radius²×cavity depth).
Starting clay mass (kg)
Retained volume×density×(1+trim allowance/100)/1000.
Symbols and units
- a
- Green outer cylinder radius (cm)
- b
- Green outer height (cm)
- c
- Green inner radius (cm)
- d
- Inner cavity depth (cm)
- e
- Measured wet density (g/cm³)
- f
- Additional trimming mass allowance (%)
Use the units shown. A list keeps the order in which you enter its values. The symbol ^ means “raised to the power of”.
Assumptions & limits
Assumptions & limits
- Target inner-outer geometry, trimming allowance, density. Returns Clay mass estimate. All coefficients and observations are user supplied; results describe only the stated mathematical model. Quantities are deterministic calculations from supplied observations and assumptions; no external data is fetched. Supported limits: Finite inputs only; numeric fields bounded as labelled. Lists and JSON records are limited to 256 entries unless a stricter tool bound is stated. No automatic design approval, legal conclusion, treatment recommendation or safety certification. Green outer cylinder radius (cm): minimum 1e-12, maximum 1000000000000.0. Green outer height (cm): minimum 1e-12, maximum 1000000000000.0. Green inner radius (cm): minimum 1e-12, maximum 1000000000000.0. Inner cavity depth (cm): minimum 1e-12, maximum 1000000000000.0. Measured wet density (g/cm³): minimum 1e-12, maximum 1000000000000.0. Additional trimming mass allowance (%): minimum 0, maximum 1000.
Are these inputs private?
These calculations run in your browser. A shared link contains the values you choose to share. Only questions submitted to the separate AI finder are sent to OpenAI.