Examples
Examples
Try the starting example
- Cable outer diameters (mm)
- 20,25,15
- Required clear gap between cables (mm)
- 10
- Usable tray width (mm)
- 150
- Single-layer occupied width (mm)
- 80
- Remaining width (mm)
- 70
- Width occupancy (%)
- 53.333333
Try another scenario
- Cable outer diameters (mm)
- [21, 25, 15]
- Required clear gap between cables (mm)
- 10
- Usable tray width (mm)
- 150
- Single-layer occupied width (mm)
- 81
- Remaining width (mm)
- 69
- Width occupancy (%)
- 54
Calculation method
Calculation method
Single-layer occupied width (mm)
One linear cable layer; sum diameters plus gaps between adjacent cables.
Remaining width (mm)
One linear cable layer; sum diameters plus gaps between adjacent cables.
Width occupancy (%)
One linear cable layer; sum diameters plus gaps between adjacent cables.
Symbols and units
- a
- Cable outer diameters (mm)
- b
- Required clear gap between cables (mm)
- c
- Usable tray width (mm)
Use the units shown. A list keeps the order in which you enter its values. The symbol ^ means “raised to the power of”.
Assumptions & limits
Assumptions & limits
- User-supplied measurements and assumptions; One linear cable layer; sum diameters plus gaps between adjacent cables. Supported limits: Finite numeric values bounded to 1e9 magnitude; lists and tables contain 1–100 records unless a stricter bound is stated. Inputs use the units shown. Lists explicitly paired by a method must have matching lengths; independent polynomial coefficient vectors may differ. Respect stated physical, interpolation, policy and computational domain limits.
Are these inputs private?
These calculations run in your browser. A shared link contains the values you choose to share. Only questions submitted to the separate AI finder are sent to OpenAI.