Examples
Examples
Try the starting example
- Current measured distance below reference full level (mm)
- 8
- Desired distance below same reference level (mm)
- 2
- Measured calibration added volume (mL)
- 300
- Observed level rise from calibration (mm)
- 5
- Measured local calibration (mL/mm)
- 60
- Estimated addition to supplied target (mL)
- 360
- Target relation
- Addition estimated
Try another scenario
- Current measured distance below reference full level (mm)
- 5
- Desired distance below same reference level (mm)
- 2
- Measured calibration added volume (mL)
- 300
- Observed level rise from calibration (mm)
- 5
- Measured local calibration (mL/mm)
- 60
- Estimated addition to supplied target (mL)
- 180
- Target relation
- Addition estimated
Calculation method
Calculation method
Measured local calibration (mL/mm)
calibrationAddedVolume/calibrationLevelRise.
Estimated addition to supplied target (mL)
max(0,(currentDeficit-targetDeficit)*calibrationRate).
Target relation
Addition estimated if currentDeficit>target; At target if equal; Current level above target otherwise.
Symbols and units
- a
- Current measured distance below reference full level (mm)
- b
- Desired distance below same reference level (mm)
- c
- Measured calibration added volume (mL)
- d
- Observed level rise from calibration (mm)
Use the units shown. A list keeps the order in which you enter its values. The symbol ^ means “raised to the power of”.
Assumptions & limits
Assumptions & limits
- Local linear conversion from user-measured level/volume calibration using one consistent measurement procedure. No engine capacity, oil grade, correct target, temperature procedure or service instruction inferred. Supported limits: Deficits>=0 in same reference scale; calibration volume and rise>0; extrapolation accuracy not guaranteed.
Are these inputs private?
These calculations run in your browser. A shared link contains the values you choose to share. Only questions submitted to the separate AI finder are sent to OpenAI.