Examples
Examples
Try the starting example
- User-specified required service fill (L)
- 7.2
- Usable correct-spec fluid on hand (L)
- 1
- Single package size (L)
- 4
- Measured drained quantity (L)
- 6.5
- Additional fluid needed (L)
- 6.2
- Packages to purchase
- 2
- Fluid remaining after supplied fill (L)
- 1.8
- Specified fill minus measured drain (L)
- 0.7
Try another scenario
- User-specified required service fill (L)
- 9.5
- Usable correct-spec fluid on hand (L)
- 1
- Single package size (L)
- 4
- Measured drained quantity (L)
- 6.5
- Additional fluid needed (L)
- 8.5
- Packages to purchase
- 3
- Fluid remaining after supplied fill (L)
- 3.5
- Specified fill minus measured drain (L)
- 3
Calculation method
Calculation method
Additional fluid needed (L)
max(0,requiredFill-onHand).
Packages to purchase
ceil(additionalNeeded/packageSize).
Fluid remaining after supplied fill (L)
onHand+packages*packageSize-requiredFill.
Specified fill minus measured drain (L)
requiredFill-drained; descriptive discrepancy only.
Symbols and units
- a
- User-specified required service fill (L)
- b
- Usable correct-spec fluid on hand (L)
- c
- Single package size (L)
- d
- Measured drained quantity (L)
Use the units shown. A list keeps the order in which you enter its values. The symbol ^ means “raised to the power of”.
Assumptions & limits
Assumptions & limits
- Purchase arithmetic only. Required fill and exact fluid specification must be supplied from the applicable service procedure; drained quantity is not treated as capacity. One package size, no mix optimization. Supported limits: fill>=0, onHand>=0, packageSize>0, drained>=0.
Are these inputs private?
These calculations run in your browser. A shared link contains the values you choose to share. Only questions submitted to the separate AI finder are sent to OpenAI.