Harvest container planning calculator

Calculate full or partial container loads required and complete cycles per container with your own figures.

Your numbers

Use the units shown. Results update as you change valid inputs.

Use full or partial container loads required and complete cycles per container to compare changes to your inputs. The method and limits below explain the scope.

Examples

Examples

Try the starting example

Harvest to move within the window (kg)
1000
Usable capacity per container (kg)
25
Available harvest window (hours)
8
Measured full container cycle (hours)
2
Full or partial container loads required
40
Complete cycles per container
4
Container fleet required
10
Fleet window capacity (kg)
1000
Spare window capacity (kg)
0

Try another scenario

Harvest to move within the window (kg)
101
Usable capacity per container (kg)
20
Available harvest window (hours)
5
Measured full container cycle (hours)
2
Full or partial container loads required
6
Complete cycles per container
2
Container fleet required
3
Fleet window capacity (kg)
120
Spare window capacity (kg)
19
Calculation method

Calculation method

Full or partial container loads required

Round up harvest mass / usable capacity.

Complete cycles per container

Round down window / cycle duration; every load must complete its whole cycle inside the window.

Container fleet required

Round up required loads / complete cycles per container.

Fleet window capacity (kg)

Fleet × cycles per container × usable container capacity.

Spare window capacity (kg)

Fleet window capacity − harvest mass.

Symbols and units
a
Harvest to move within the window (kg)
b
Usable capacity per container (kg)
c
Available harvest window (hours)
d
Measured full container cycle (hours)

Use the units shown. A list keeps the order in which you enter its values. The symbol ^ means “raised to the power of”.

Assumptions & limits

Assumptions & limits

  • Uniform complete container cycles, with the first available at window start. Does not simulate queues, staggered arrivals, partial cycles, washing bottlenecks or transport capacity.
Are these inputs private?

These calculations run in your browser. A shared link contains the values you choose to share. Only questions submitted to the separate AI finder are sent to OpenAI.

Further reading

OpenStax: arithmetic and geometry ↗

Background reading; this does not imply endorsement or independent review of SumFizz.

Share this page
Share this calculator

Leave unchecked to share the page without your entered values.