Examples
Examples
Try the starting example
- Engaged cut width (mm)
- 10
- Axial cut depth (mm)
- 2
- Table feed (mm/min)
- 1000
- Material removal rate (mm³/min)
- 20000
- Material removal rate (cm³/min)
- 20
Try another scenario
- Engaged cut width (mm)
- 2
- Axial cut depth (mm)
- 1
- Table feed (mm/min)
- 500
- Material removal rate (mm³/min)
- 1000
- Material removal rate (cm³/min)
- 1
Calculation method
Calculation method
Material removal rate (mm³/min)
Engaged width × axial depth × table feed.
Material removal rate (cm³/min)
Divide mm³/min by 1000 to obtain cm³/min.
Symbols and units
- a
- Engaged cut width (mm)
- b
- Axial cut depth (mm)
- c
- Table feed (mm/min)
Use the units shown. A list keeps the order in which you enter its values. The symbol ^ means “raised to the power of”.
Assumptions & limits
Assumptions & limits
- Constant rectangular engagement using supplied actual cutting width, depth and feed. No cutting-force, power, tool-life or safe-parameter prediction is made. Zero engagement or feed gives zero removal.
Are these inputs private?
These calculations run in your browser. A shared link contains the values you choose to share. Only questions submitted to the separate AI finder are sent to OpenAI.
Further reading
Sandvik Coromant: milling formulas and definitions ↗
Background reading; this does not imply endorsement or independent review of SumFizz.