Examples
Examples
Try the starting example
- Supplied chain-slack observations: wheel-position label, slack mm
- 0deg,20 90deg,25 180deg,15 270deg,20
- Supplied minimum comparison slack (mm)
- 20
- Supplied maximum comparison slack (mm)
- 30
- Tightest measured-position labels
- 180deg
- Measured slack spread (mm)
- 10
- Positions outside supplied comparison interval
- 180deg
- Uniform measurement-offset interval that would put every reading inside supplied bounds (mm)
- 5, 5
Try another scenario
- Supplied chain-slack observations: wheel-position label, slack mm
- 0deg,20 90deg,25 180deg,15 270deg,20
- Supplied minimum comparison slack (mm)
- 20
- Supplied maximum comparison slack (mm)
- 25
- Tightest measured-position labels
- 180deg
- Measured slack spread (mm)
- 10
- Positions outside supplied comparison interval
- 180deg
- Uniform measurement-offset interval that would put every reading inside supplied bounds (mm)
- Empty: no common measurement offset
Calculation method
Calculation method
Tightest measured-position labels
Positions attaining smallest supplied slack measurement.
Measured slack spread (mm)
Maximum−minimum measured slack.
Positions outside supplied comparison interval
Compare each exact decimal reading to supplied inclusive bounds.
Uniform measurement-offset interval that would put every reading inside supplied bounds (mm)
All readings+delta in [min,max] requires delta in [min−smallest,max−largest]; report Empty when no common arithmetic offset exists.
Symbols and units
- a
- Supplied chain-slack observations: wheel-position label, slack mm
- b
- Supplied minimum comparison slack (mm)
- c
- Supplied maximum comparison slack (mm)
Use the units shown. A list keeps the order in which you enter its values. The symbol ^ means “raised to the power of”.
Assumptions & limits
Assumptions & limits
- A supplied observation/interval feasibility worksheet. A uniform arithmetic measurement offset is not an actual axle movement or adjustment instruction; manufacturer procedure, suspension position and mechanical condition are external.
Are these inputs private?
These calculations run in your browser. A shared link contains the values you choose to share. Only questions submitted to the separate AI finder are sent to OpenAI.
Further reading
OpenStax: ratios, unit rates and supplied measurement arithmetic ↗
Background reading; this does not imply endorsement or independent review of SumFizz.