Examples
Examples
Try the starting example
- Fully extended suspension reference measurement (mm)
- 600
- Bike-only settled measurement (mm)
- 580
- Rider-loaded settled measurement (mm)
- 550
- User-supplied reference suspension travel (mm)
- 150
- Bike-only static sag (mm)
- 20
- Rider sag (mm)
- 50
- Static sag fraction of supplied travel (%)
- 13.333333
- Rider sag fraction of supplied travel (%)
- 33.333333
Try another scenario
- Fully extended suspension reference measurement (mm)
- 600
- Bike-only settled measurement (mm)
- 580
- Rider-loaded settled measurement (mm)
- 540
- User-supplied reference suspension travel (mm)
- 150
- Bike-only static sag (mm)
- 20
- Rider sag (mm)
- 60
- Static sag fraction of supplied travel (%)
- 13.333333
- Rider sag fraction of supplied travel (%)
- 40
Calculation method
Calculation method
Bike-only static sag (mm)
extended-bikeOnly.
Rider sag (mm)
extended-riderLoaded.
Static sag fraction of supplied travel (%)
100*staticSag/travel.
Rider sag fraction of supplied travel (%)
100*riderSag/travel.
Symbols and units
- a
- Fully extended suspension reference measurement (mm)
- b
- Bike-only settled measurement (mm)
- c
- Rider-loaded settled measurement (mm)
- d
- User-supplied reference suspension travel (mm)
Use the units shown. A list keeps the order in which you enter its values. The symbol ^ means “raised to the power of”.
Assumptions & limits
Assumptions & limits
- Measurement differences using one consistent reference axis; percentages are descriptive. No preferred sag range, preload setting or handling/safety recommendation. Supported limits: extended>=bikeOnly>=riderLoaded>=0; travel>0; measurements not necessarily equal actual wheel travel unless same axis.
Are these inputs private?
These calculations run in your browser. A shared link contains the values you choose to share. Only questions submitted to the separate AI finder are sent to OpenAI.