Examples
Examples
Try the starting example
- Measured pet length, width, height (cm)
- 60,20,40
- User-supplied additional length, width, height (cm)
- 10,10,5
- Crates: name, internal length, width, height cm
- A,70,35,50 B,65,40,50
- Required internal length, width, height (cm)
- 70, 30, 45
- Crates matching all entered requirements
- A
- Clearance above requirements by matching crate (cm)
- A: 0, 5, 5
- Matching crate count
- 1
Try another scenario
- Measured pet length, width, height (cm)
- 60,20,40
- User-supplied additional length, width, height (cm)
- 0,10,5
- Crates: name, internal length, width, height cm
- A,70,35,50 B,65,40,50
- Required internal length, width, height (cm)
- 60, 30, 45
- Crates matching all entered requirements
- A, B
- Clearance above requirements by matching crate (cm)
- A: 10, 5, 5; B: 5, 10, 5
- Matching crate count
- 2
Calculation method
Calculation method
Required internal length, width, height (cm)
Add each explicit allowance to its corresponding measured dimension.
Crates matching all entered requirements
Compare all three oriented internal crate dimensions with the entered requirements, without rotating or swapping pet dimensions.
Clearance above requirements by matching crate (cm)
Subtract the three requirements from each matching crate dimension.
Matching crate count
Count crate rows meeting every geometric requirement.
Symbols and units
- a
- Measured pet length, width, height (cm)
- b
- User-supplied additional length, width, height (cm)
- c
- Crates: name, internal length, width, height cm
Use the units shown. A list keeps the order in which you enter its values. The symbol ^ means “raised to the power of”.
Assumptions & limits
Assumptions & limits
- A geometric comparison under your explicitly supplied allowances. It does not derive airline, animal-welfare or carrier requirements, assess comfort or certify a transport crate.
Are these inputs private?
These calculations run in your browser. A shared link contains the values you choose to share. Only questions submitted to the separate AI finder are sent to OpenAI.
Further reading
OpenStax: arithmetic and geometry ↗
Background reading; this does not imply endorsement or independent review of SumFizz.