Examples
Examples
Try the starting example
- Available garment print width (cm)
- 30
- Available garment print height (cm)
- 40
- Artwork width (cm)
- 20
- Artwork height (cm)
- 10
- Minimum margin on every side (cm)
- 5
- Centred artwork left coordinate (cm)
- 5
- Centred artwork top coordinate (cm)
- 15
- Smallest edge clearance (cm)
- 5
- Fit within all supplied margins
- Yes
Try another scenario
- Available garment print width (cm)
- 30
- Available garment print height (cm)
- 40
- Artwork width (cm)
- 40
- Artwork height (cm)
- 10
- Minimum margin on every side (cm)
- 5
- Centred artwork left coordinate (cm)
- -5
- Centred artwork top coordinate (cm)
- 15
- Smallest edge clearance (cm)
- -5
- Fit within all supplied margins
- No
Calculation method
Calculation method
Centred artwork left coordinate (cm)
(Available width − artwork width)/2, measured from print-area left edge.
Centred artwork top coordinate (cm)
(Available height − artwork height)/2, measured from print-area top edge.
Smallest edge clearance (cm)
Minimum of horizontal and vertical centred clearances. Negative values indicate artwork outside the area.
Fit within all supplied margins
Yes only if both centred clearances are at least the supplied minimum margin.
Symbols and units
- a
- Available garment print width (cm)
- b
- Available garment print height (cm)
- c
- Artwork width (cm)
- d
- Artwork height (cm)
- e
- Minimum margin on every side (cm)
Use the units shown. A list keeps the order in which you enter its values. The symbol ^ means “raised to the power of”.
Assumptions & limits
Assumptions & limits
- Centres an unrotated rectangular artwork inside a measured print area. Reports an oversized design as a no-fit result. Seams, garment curvature, stencil bleed, platen clamps and registration tolerances are excluded.
Are these inputs private?
These calculations run in your browser. A shared link contains the values you choose to share. Only questions submitted to the separate AI finder are sent to OpenAI.
Further reading
OpenStax: arithmetic and geometry ↗
Background reading; this does not imply endorsement or independent review of SumFizz.